Technical Documentation
Material Safety DataSheet
7N166 0531 EN
Material Safety DataSheet
7N166 3N04 EN
Material Safety DataSheet
7N166 7191 EN
Material Safety DataSheet
7N166 7N38 EN
Material Safety DataSheet
7N166 V316 EN
Technical DataSheet
7N165 EN
Material Safety DataSheet
7N166 0531 EN
Material Safety DataSheet
7N166 3N04 EN
Material Safety DataSheet
7N166 7191 EN
Material Safety DataSheet
7N166 7N38 EN
Material Safety DataSheet
7N167 9999 EN
Material Safety DataSheet
7N166 V316 EN
Declaration of Performance
7N165 EN
Preparation and Application
Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.
Concrete: the concrete should be allowed to have a minimum 28 days to harden, a minimal tensile strength of 1.5 N/mm² and a minimum compression resistance of 25 N/mm². The surface must be clean, dry, free from laitance, old paints and other contaminants.
For more information see the Technical DataSheet or contact us.