ISO 12944
Corrosion protection for C3-H
ISO 12944
Corrosion protection for C4-H
UNE 48271
Anti-corrosive epoxy primer - Type 1 and Type 2
EN 13501-1
Fire reaction: B-s1, d0 class
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Technical DataSheet 7K168 EN
Material Safety DataSheet 7K161 0503 EN
Material Safety DataSheet 7K161 1N01 EN
Material Safety DataSheet 7K161 2N08 EN
Material Safety DataSheet 7K161 3N09 EN
Material Safety DataSheet 7K161 5N02 EN
Material Safety DataSheet 7K161 5N18 EN
Material Safety DataSheet 7K161 6N02 EN
Material Safety DataSheet 7K161 6N19 EN
Material Safety DataSheet 7K161 7N35 EN
Material Safety DataSheet 7K161 7N40 EN
Material Safety DataSheet 7K161 8N07 EN
Material Safety DataSheet 7L198 9999 EN
Material Safety DataSheet 7K161 9N05 EN
Material Safety DataSheet 7K161 9N10 EN
Preparation and Application

Steel: blast clean the steel to Sa 2½ grade, according to ISO 8501-1. The roughness profile should be adjusted, depending on the thickness of the product to be applied. Remove powder residues and abrasive residues from surface. These indications are generic, applicable to several products and merely informative.

Aluminium: remove oil, grease or soap film with neutral detergent or emulsion cleaner. Blast lightly with fine abrasive.

Galvanized Surfaces: remove any oil soap film using a neutral detergent. Treat the surface in accordance with a lightly blast with fine abrasive. If galvanizing has been exposed to exterior weathering for 6 months or more, remove zinc corrosion products by mechanical means, like power sander. Remove oil grease with the cleaner.

For more information see the Technical DataSheet or contact us.