EN 1504-2
Product with CE marking
EN 13813
Product with CE marking
ICS
Industrial Coatings Solutions
Product reserved to professional users, according to the REACH Regulation.
Technical Documentation
Technical DataSheet 7F310 EN
Material Safety DataSheet 7F311 EN
Material Safety DataSheet 7F312 9999 EN
Declaration of Performance 7F310 EN
Preparation and Application

Concrete: the concrete should be allowed to have a minimum 28 days to harden, a minimal tensile strength of 1.5 N/mm² and a minimum compression resistance of 25 N/mm². The surface must be clean, dry, free from laitance, old paints and other contaminants.

Self-Protection Asphalt Screens with Mineral and Asphalt: the surface must be well adherent, clean, dry and free from oils, grease, dust and other contamination. Wash the surface with neutral detergents, followed by washing with clean high pressure water.

Polyurethane Foam: the surface must be well adhered, clean, dry and free of oils, grease, dust and contamination.

Wood: sand it following the direction of the fibres with a medium grade sand paper.

For more information see the Technical DataSheet or contact us.